Chapter 5
50
F-5-17
ADF feed test (ADF FEED TEST)
ADF operation verification mode. Press numeric keypad key 4 on the FUNCTION TEST menu to select the ADF feed test. Place a document on the document
platen and press the start key to transfer the document at the speed matched to the scan resolution setting. In this test, enter a transfer speed between 500 and 2000
(mm/s) from the numeric keypad and verify the transfer speed. Select between the ON and OFF states with the left and right cursor keys to select between single-
sided document feed (OFF) and double-sided document feed (ON).
Book feed test (6-5: BOOK FEED TEST)
Performs a book feed operation with a specified magnification and in a specified size.
Speaker test (6-6: SPEAKER)
Speaker operation verification mode. Press numeric keypad key 6 on the FUNCTION TEST menu to select the speaker test. In this test, the speaker generates tonal
signals at 100 Hz intervals, from 200 Hz to 5 kHz, in varying sound volumes. Signal output from the speaker is thus verified.
F-5-18
Operation panel test (6-7: OPERATION PANEL)
Operation panel operation verification mode. Press numeric keypad key 7 on the FUNCTION TEST menu to select the OPERATION PANEL test menu. Functions
that can be verified from this menu are listed below.
Press numeric keypad key 4.
BSCT on BDOC[A3 ]
BDSS3-0 [of of of of]
Press numeric keypad key 5.
BSCT: Not used
BDOC: Not used
BDSS3-0 [of of of of]: Not used
LAST of
EXIT of
REG of
CVR of
LAST: Not used
EXIT: Not used
REG: Not used
CVR: Not used
Press numeric keypad key 7.
WID1 of
WID2 of
LEN1 of
LEN2 of
WID1: Not used
WID2: Not used
LEN1: Not used
LEN2: Not used
Press numeric keypad key 8.
REF xxx ANT xxx
|ANT - LEF| xxx
REF: Toner reference voltage (A/D value)
ANT: Toner antenna voltage (A/D value)
ANT - LEF: Differential voltage (A/D value)
NCR Sts
12345678
DPT MGN OK RDY 1234
[1] Card reader and card availability indication
Card available: Eight-digit card ID
No card: Card None
No card reader available: NCR None
[2] Card type and card reader status indication
DPT: Department card
PRC: Unit pricing card
MAX: Upper limit setting card
ERS: Erased card
SRV: Service card
(No indication): No card
[3] Card type
MGN: Magnetic card
OPT: Optical card
[1]
[2]
[3]
[4]
[5]
[6]
Press numeric keypad key 6.
[4] Can status
OK: Normal scan
ERR: Scan error
NG: Nonstandard error
(No indication): No card
[5] Equipment status
IN: Initialization in progress
RDY: Ready
[6] Card reader version indication
Four-digit number
6-6: SPEAKER
FREQ [1] VOL [2]
Press numeric
keypad key 1.
SPEAKER
FREQ TEST
SPEAKER
VOL[*] :MIN [#]:MAX
Press numeric
keypad key 2.
Press the start key
to change the
transmission frequency
Signal tone volume adjustment.
* denotes the minimum, #, the maximum.
The volume is adjustable level by level
using the start key.
Содержание iR1018
