Canon IR 2420, Сетевое руководство

Страница: 85 / 113

Setting Up the Machine Using a Web Browser (Remote UI) 3-18
Set
tin
g Up th
e Mach
ine f
o
r
Y
our
Ne
tw
or
k En
viro
nme
n
t
3
12
Specify whether to use IP Address Range Settings.
❑
If you want to activate the IP Address Range Settings, place a check for [Use IP
Address Range Settings].
NOTE
The IP Address Range Settings can be set for both IPv4 and IPv6 networks.
❑
Click [Register]
➞
enter the IP address or IP address range you want to permit or
reject
➞
click [Register].
Repeat this step to enter another IP address or IP address range.
NOTE
•
To specify an IP address range, enter the first address, followed by a hyphen (-),
and then the last address.
Example)
172.20.88.125-172.20.88.175
•
If you want to change a registered IP address or IP address range, select one from
the list
➞
click [Edit].
❑
Select the IP address or IP address range you want to permit or reject from the list
➞
click [Permit/Reject] to change the setting.
NOTE
For details about each setting, see “Setting the IP Address Range,” on p. 2-38.
13
Under [Allowed Receiving MAC Address Settings], specify
whether to use RX MAC Address Settings.
❑
If you want to activate the RX MAC Address Settings, place a check for [Use Allowed
Receiving MAC Address].
❑
Click [Register]
➞
enter the MAC address you want to permit
➞
click [Register].
Repeat this step to enter another MAC address.
NOTE
•
If you want to change a registered MAC address, select one from the list
➞
click
[Edit].
•
For details about each setting, see “Setting the MAC Address Filter,” on p. 2-46.
14
Click [OK] on the top of the page.
The settings become valid after you reset the print server or restart the machine.