
10
3
Ensure that the indicator lamp lights after flashing for a moment, and then
close the card slot cover.
Removing a Memory Card
1
Open the card slot cover.
2
Ensure that the indicator lamp is not flashing, then remove the memory card.
3
Close the card slot cover.
.
When Read/write mode
Read/write mode
Read/write mode
Read/write mode is selected, you cannot print the photos in the
memory card. After using the card slot as the memory card drive of the
computer, remove the memory card, then be sure to select Read-only
Read-only
Read-only
Read-only
mode
mode
mode
mode again. See “Setting up the Card Slot as the Memory Card Drive of
the Computer” on page 47.
If you have used a computer to edit or process the data stored in the
memory card, be sure to print photos from the computer. Using the
operation panel to print photos may result in improper printing.
If you use the printer connected to your computer, follow the instructions for
removal of the memory card from the computer. For the procedure, see “Setting
up the Card Slot as the Memory Card Drive of the Computer” on page 47.
Removing the memory card or turning off the printer while the indicator
lamp is flashing can damage the data stored in the memory card.
iP6700D_DPG_US.book Page 10 Thursday, April 13, 2006 11:05 AM