Canon iP4700 - PIXMA Color Inkjet Printer, Упрощенное руководство по обслуживанию

Страница: 7 / 24

(7/ 24 )
Cycles of
blinking of
Alarm and
Power LEDs
Error
Error
code
Conditions
Solution
(Check points and replacement items)
7 times Ink absorber full [5B00,
5B01]
The ink absorber is
supposed to be full.
Error codes:
5B00: Main ink absorber is
full (overseas).
5B01: Main ink absorber is
full (Japan).
1) Ink absorber condition
2) Part replacement:
- Ink absorber kit
3) Ink absorber counter value in the
EEPROM;
reset the ink absorber counter.
8 times Print head
temperature rise
error
[5200] The print head temperature
exceeded the specified
value.
1) Print head condition
2) Head contact pin condition of the
carriage unit
3) Cable connection
4) Part replacement:
- Print head
- Logic board
- Carriage unit
9 times EEPROM error [6800,
[6801]
A problem occurred in
reading from or writing to
the EEPROM.
1) Part replacement:
- Logic board
10 times VH monitor error [B200] The print head voltage is
abnormal.
1) Head contact pin condition of the
carriage unit
2) Cable connection (especially the
carriage FFC)
3) Part replacement:
- Print head and logic board
(Replace them at the same time.)
- Power supply unit
- Carriage unit
11 times Carriage lift
mechanism
error
[5110] The carriage did not move
up or down properly.
1) Foreign material or paper debris that
obstructs the carriage movement;
remove foreign material.
2) Part replacement:
- Switch system unit
- Carriage unit
12 times APP position
error
[6A80] An error occurred in the
APP motor.
14 times APP sensor
error
[6A90] An error occurred during
paper feeding or paper
ejection.
1) Foreign material or paper debris
around the purge drive system unit;
remove foreign material, and
confirm that the ink absorber right
beneath the purge drive system unit
stays in place and does not contact
the unit.
2) Foreign material or paper debris
around the ASF unit;
remove foreign material.
3) Cable connection
4) Part replacement:
- Purge drive system unit
- Logic board