Canon iP4680, Упрощенное руководство по обслуживанию

Страница: 4 / 21

(4/21)
LED
(Blinking in
orange)
Error
Error
code
Solution Remarks
11 times Failed in automatic print
head alignment.
[2500] Press the Resume/Cancel button
to clear the error, then perform the
automatic print head again.
(In the iP4600 / iP4680, use Matte
Photo Paper MP-101.)
13 times The remaining ink
amount unknown.
[1683] Replace the applicable ink tank
with a new one. Printing with a
once-empty ink tank can damage
the printer.
To continue printing without
replacing the ink tank(s), press
the Resume/Cancel button for 5
sec. or longer to disable the
function to detect the remaining
ink amount. After the operation, it
is recorded in the printer
EEPROM that the function to
detect the remaining ink amount
was disabled.
The ink tank installed
is judged to have once
been empty.
14 times Ink tank not recognized. [1684] A non-supported ink tank (an ink
tank that is sold in a different
region from where the printer was
purchased) is installed (the ink
tank LED is turned off). Install the
supported ink tanks.
15 times Ink tank not recognized. [1410 to
1419]
A hardware error occurred in an
ink tank (the ink tank LED is
turned off). Replace the ink
tank(s).
16 times No ink (no raw ink). [1688] Replace the empty ink tank(s),
and close the scanning unit
(cover).
Printing with an empty ink tank
can damage the printer.
To continue printing without
replacing the ink tank(s), press
the Resume/Cancel button for 5
sec. or longer to disable the
function to detect the remaining
ink amount. After the operation, it
is recorded in the printer that the
function to detect the remaining
ink amount was disabled.
19 times Non-supported hub [2002] Remove the applicable USB hub
from the PictBridge (USB)
connector.
*1: Only for models supporting CD / DVD printing
*2: Only for models not supporting CD / DVD printing