Canon ImageRunner C2550, Сетевое руководство, Страница: 30 / 234

Connecting the Machine to a Computer or Network 2-4
2
Settings Common
to t
h
e Netw
or
k
Protocols
WARNING
When connecting the interface cable or network cable, be sure to observe the
following precautions to avoid electrical shock.
- Turn OFF the machine's main power switch before disconnecting the power
cord from the power outlet. (See Chapter 1, "Before You Start Using This
Machine," in the
Reference Guide .)
- Turn OFF the computer and disconnect the power cord from the power outlet.
IMPORTANT
•
You cannot use the machine as a repeater, bridge, or gateway.
•
If two or more machines are on an AppleTalk network, they should be switched 'ON' 10
seconds or more apart.
NOTE
•
The machine can automatically detect the type of Ethernet (10Base-T or 100Base-TX).
•
If you are using a mixed 10 Base-T/100 Base-TX environment, devices on the network
(hubs, routers, etc.) must support the mixed environment. For more information, consult
your local authorized Canon dealer.
•
After connecting the network cable, perform the following operations. (For more
information, see the relevant descriptions.)
- Set the date and time, and System Manager settings. (See Chapter 6, "System
Manager Settings," in the Reference Guide .)
- Set the network settings.
- Install a driver if necessary. (See the PCL Driver Guide , the PS Driver Guide , the UFR II
Driver Guide , the Fax Driver Guide , the Mac PS Driver Guide , the Mac UFR II Driver
Guide , or the Network Quick Start Guide .)