Logging in to the Machine
8
Logging in to the Machine
This section describes the operation procedures for the log-in methods provided by
the uniFLOW OM integration.
Entering a User ID and Password
Enter your user ID and password to log in when the screen shown in step 1 is
displayed.
NOTE
To log in to the machine, you must have a valid user ID and password (if set)
registered. For instructions on how to register a user ID and password in the uniFLOW
OM server, see the documentation included with the uniFLOW OM software.
NOTE
•
If no password is set for the user ID, leave <Pass:> blank.
•
If you make a mistake when entering the user ID/password, press
(Clear)
➞
enter
the correct user ID/password.
•
If the user ID/password that you entered is incorrect, an error message will appear.
1
Enter your user ID and password
(up to 32 characters respectively)
using the software keyboard and
-
(numeric keys).
❑
Use [
], [
], or
(Scroll Wheel) to
select <User ID:>
➞
press [OK]
➞
enter
your user ID.
❑
Use [
], [
], or
(Scroll Wheel) to
select <Pass:>
➞
press [OK]
➞
enter the
password.
The characters that you enter for the
password are displayed as asterisks
(********).
❑
Press the right Any key to select
<Login>.
You can also press
(Log In/Out) to
log in.
