Canon imageRUNNER ADVANCE DX 4700 Series, Руководство по обслуживанию

Страница: 95 / 105

Canon
imageRUNNER ADVANCE DX 4700 Series Service Guide
imageRUNNER ADVANCE DX 4700 Series Service Guide September 2022
Revision 7 Page 88
Table 40 – Staple Finisher-Y1, Booklet Finisher-Y1, and 2/3 Hole Puncher Unit-A1
Specifications Continued
Item Specifications
Capacity Per
Tray 61
Tray Mode Paper Size
B
(Upper)
No Collating, Collate
and Group Modes Set
LTR, EXEC, STMT, and STMTR:
250 sheets (or 1 7/8” (47 mm) in
height)
11” x 17”, LGL, LTRR:
125 sheets (or 1” (24 mm) in height)
Offset (Collate &
Group)
LTR and EXEC:
250 sheets (or 1 7/8” (47 mm) in
height)
11” x 17”:
125 sheets (or 1” (24 mm) in height)
With Different Paper
Sizes
125 sheets (or 1” (24 mm) in height)
A
(Lower)
No Collating, Collate
and Group Modes Set
LTR, EXEC, STMT, and STMTR:
3,000 sheets (or 16 5/8” (423 mm) in
height) 62
11” x 17”, LGL, LTRR:
1,500 sheets (or 8 1/2” (216 mm) in
height)
Offset (Collate &
Group)
LTR and EXEC:
3,000 sheets (or 16 5/8” (423 mm) in
height) 62
11” x 17”, LGL, and LTR:
1,500 sheets (or 8 1/2” (216 mm) in
height)
Corner/Double Staple
LTR and EXEC:
Total of 200 sets or 3,000 sheets
(or 16 5/8” (423 mm) in height)
11” x 17”, LGL and LTRR:
Total of 100 sets or 1,500 sheets
(or 8 1/2” (216 mm) in height)
Staple-Free
LTR: 200 sets
11” x 17”: 100 sets
C
(Inner)
Up to 100 sheets (21.7 lb bond
(81.4 g/m 2 ))
IMPORTANT
•
The Staple-Free mode can only be used with Thin, Plain, Color, Recycled,
and Pre-Punched paper.
• The Staple Finisher-Y1 and Booklet Finisher-Y1 can staple any other paper
type except, Transparencies, Tracing Paper, and Labels.
61 Based on 20 lb bond (80 g/m 2 ) paper. The capacity may vary, when other paper weights are used.
62 If the customer uses Thin Paper (14 to 15 lb bond (52 to 59 g/m 2 )), the tray can hold approximately 1,500 sheets
(or 8 1/2” (216 mm) in height).