Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 56

Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 53

Version 1

imageRUNNER ADVANCE C9075S PRO Customer Expectations Document

Page 53

15.6 Note for Customers Who Cut Their Own Paper

Customers who cut their own paper may experience:

•

An increase of paper dust in the machine

•

Shortening the life of the machine’s fixing rollers due to excessive wear from the

rough side of the cut paper

•

Paper jams due to paper dust getting into areas of the machine where it is not

meant to be

•

Improper paper feeding

•

Paper registration inaccuracies

Follow the precautions below to minimize the above issues:

•

Have a process in place to regularly make sure that the cutting blades are

sharpened, and that cuts are made as clean as possible.

•

Place the paper with the factory mill cut sides facing to the right (leading edge),

and to the front of the machine when feeding paper from a location other than the
multi-purpose tray. If paper is fed from the multi-purpose tray, place the paper
with the factory mill cut sides facing to the left (leading edge), and to the front of
the machine.

•

Pay special attention to the paper grain orientation when cutting it. For more

information on paper grain, see

“Paper Grain and Curl,”

on p. 52.

•

The best results for color consistency and front-to-back registration are obtained

by using factory mill cut, digital compatible paper.

«
...
51
52
53
54
55
...
»

Содержание imageRUNNER ADVANCE C9075S PRO

























































Отзывы:

Нет отзывов