Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 250 | Manualshive

Страница: 250 / 456

Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 250

#

IMPORTANT

• Paper which has been rolled or curled must be straightened out before loading it

into the paper tray.

• Make sure that the height of the paper stack does not exceed the loading limit

mark (

) on the inside of the paper tray.

#

NOTE

• If there are instructions on the package of paper about which side of the paper to

load, follow those instructions.

• When paper is loaded, the side facing up is the one printed on.
• If problems occur, such as poor print quality or paper jams, try turning the paper

stack over, and reload it. However, textured paper, 1-sided coated paper, and paper
already printed on cannot be turned over. Change to new paper.

• When loading paper, make sure that the height of the paper stack does not exceed

20 mm (13/16"). If the height of the paper stack exceeds 20 mm (13/16"), the
edges of the paper stack may become curled or creased, and poor print quality
may result.

5.

Gently push the paper tray back into the machine until it clicks into place in the closed
position.

The inside lifter automatically rises, and prepares the paper tray for printing.

#

CAUTION

When returning the paper tray to its original position, be careful not to get your
fingers caught, as this may result in personal injury.

Chapter 9 - Paper, toner, and staples

250

Load the media into the paper module

«
...
248
249
250
251
252
...
»

Содержание imageRUNNER ADVANCE C9075S PRO









































































































































































































































































































































































































































































Отзывы:

Нет отзывов