Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 199 | Manualshive

Страница: 199 / 456

Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 199

Place books and other bound originals onto the glass plate in the same way.

#

NOTE

When you are enlarging an A4/B5/A5/LTR/STMT original onto A3/B/ 11" x
17"/LGL paper, place the original horizontally onto the glass plate, and align it with
the A4R/B5R/A5R/LTRR/STMTR marks.

3.

Gently close the feeder.

#

CAUTION

•

Close the feeder gently to avoid getting your hands caught, as this may result
in personal injury.

•

Do not press down hard on the feeder when using the glass plate to make
copies of thick books. Doing so may damage the glass plate and result in
personal injury.

•

Be aware that the light emitted from the glass plate may be very bright when
closing the feeder.

#

IMPORTANT

If you are placing the original onto the glass plate, the size of the original is detected
after the feeder is closed. Be sure to close the feeder before copying.

Chapter 7 - Copy jobs

199

Put originals on the glass plate

«
...
197
198
199
200
201
...
»

Содержание imageRUNNER ADVANCE C9075S PRO









































































































































































































































































































































































































































































Отзывы:

Нет отзывов