Canon imageRUNNER ADVANCE 8105, Начало работы

Страница: 128 / 256

NetWare Network Setup Procedures
5-2
5
Using a NetWare Network (Windows)
NetWare Network Setup Procedures
To use a NetWare network, it is necessary to perform the following procedures.
1
NetWare Print Service Settings (See e-Manual > Network)
Specify the NetWare print service settings. (Optional equipment is required to print from a computer. For the equipment needed, see “Optional Equipment and System Requirements
for Connecting to a Network,” on p. 2-2.)
To specify the settings from the computer, use:
NWADMIN or PCONSOLE (Novell software provided with NetWare)
Canon utilities
•
•
2
Protocol Settings (See “Protocol Settings,” on p . 5-3 .)
Specify the protocol settings. To specify the settings, use:
The machine’s control panel
The Remote UI (via a web browser)
Canon utilities
•
•
•
3
Computer Settings for Printing (See e-Manual > Network)
Specify the settings of each computer you use for printing. (Optional equipment is required to print from a computer. For the equipment needed, see “Optional Equipment and
System Requirements for Connecting to a Network,” on p. 2-2.)
It is recommended that steps 1 and 2 above be performed by the network administrator.
To configure settings with software other than the control panel of the machine, NWADMIN, or PCONSOLE, TCP/IPv4 protocol must be
supported by your network environment (IPv6 is not supported).
If you are using the imagePASS, see the manual provided with the imagePASS.
If you are using the imagePASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS.
•
•
•
•