manualshive.com logo in svg

Canon imageRUNNER ADVANCE 6500 series, Руководство по устранению неисправностей

Поделиться
Скачать
Canon imageRUNNER ADVANCE 6500 series Скачать руководство пользователя страница 3

Contents

Image Faults......................................................................................................... 1

Black Line appearing in sub scanning direction on image due to fluff adhered to the leaser

exposure path..................................................................................................................................1

Measure against soiled image or blank image due to a fault in the surface finishing of the

developing assembly lower sleeve.................................................................................................. 3

Poor density or white band image due to the boss breakage of the stirring rod................................. 4
Foggy image

/

black lines due to detached dustproof glass inside the laser scanner unit..................11

Stained image (at regular intervals of 63mm) due to scratches on the developing upper/lower

cylinder.......................................................................................................................................... 12

Faulty Feeding....................................................................................................13

Inconsistent folding position when using booklet mode with a small number of sheets due to

deflected paper inside the processing tray (Booklet Finisher-V1/V2/Y1/AA1)...............................13

Malfunction......................................................................................................... 19

When using the manual stapler, staple position is shifted and sheets are not stapled due to a

spring coming off. (Staple Finisher-V1, Booklet Finisher-V1)........................................................ 19

Message is wrongly displayed due to the displaced waste staple case (Staple Finisher-X1 /

Booklet Finisher-X1 / Staple Finisher-N1 / Booklet Finisher-N1)...................................................24

Response of static touch panel is slow due to electrical noise..........................................................29
" Remove all the output paper" is displayed when delivering to the escape tray (Staple

Finisher-V1/Booklet Finisher-V2)...................................................................................................30

Boss breakage in the shutter of patch sensor assembly occurring when opening/closing the

shutter............................................................................................................................................32

Not all the icons are displayed on the UI screen of main body due to disconnection of the

connectors..................................................................................................................................... 34

Measures when DADF does not open.............................................................................................. 36

Transmission/Fax-Related................................................................................ 39

Skip Blank Originals fails in Scan and Send/Scan and Store due to foreign particles attached

to the scanning area...................................................................................................................... 39

Jam (Main Unit).................................................................................................. 41

0108/0215 jam codes due to the coming off of the detection flag of the photo sensor assembly..... 41
Measures when the display of jam 0118/010F/0218/020F/0A18/0A0F cannot be canceled

(POD Deck Lite-C1/Paper Deck Unit-E1/F1).................................................................................42

Jam (Delivery options).......................................................................................44

1004 Jam Code or folded corner on printed out paper due to positional displacement of

support (Staple/Saddle/Booklet/Finisher)...................................................................................... 44

110F Jam code due to meshing failure of the timing belt (Staple-Q1/W1/Booklet-Q1/W1/

Saddle-AK2/Finisher-AK1).............................................................................................................46

i

Содержание imageRUNNER ADVANCE 6500 series
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды