Canon imageRUNNER 5075, Справочное руководство, Страница: 118 / 502

Finisher-AD1/Saddle Finisher-AD2/Puncher Unit-AT1/Document Insertion/Folding
Unit-F1/Document Insertion Unit-E1 3-16
3
Option
al Equi
pment
Finishing Modes
The Finisher-AD1 and Saddle Finisher-AD2 are equipped with the following
finishing modes.
CAUTION
•
Do not place anything other than output paper in the trays of the finisher, as
doing so may damage the trays.
•
Do not place anything under the trays of the finisher, as doing so may damage
the trays.
NOTE
If the Collate or Group mode is set, the output trays move downward as the stack of
paper that is output increases in quantity and thickness. Once an output tray has reached
its stacking limit, subsequent prints are automatically delivered to the next available tray.
If all of the available trays have reached their stacking limits, printing stops temporarily.
Remove all of the output paper from the trays. The trays move upward, and printing
resumes.
■
Collate Mode
The prints are automatically collated into sets arranged in page order. The collated print
sets can be shifted by pressing [Offset].
■
Group Mode
All prints of the same original page are grouped together. The grouped print sets can be
shifted by pressing [Offset].
■
Offset Mode
The print output is shifted alternately to the front and back of the tray, in a vertical (portrait)
orientation, or a horizontal (landscape) orientation, depending on the orientation of your
originals. For example, if you place LTRR originals, the paper is output and shifted in the
horizontal direction. If you place LTR originals, the paper is output and shifted in the
vertical direction.