Canon imageRUNNER 5065 series, Руководство по обслуживанию

Страница: 261 / 596

Chapter 8
8-45
F-8-154
8.10.38 Separation Roller
8.10.38.1 Before Removing the Separation Roller
0015-5246
iR5065 / iR 5055 / iR5075 / / /
1) Remove the right deck pickup assembly.
(page 8-
30) Reference[Removing the Right Deck Pickup Assembly]
2) Remove the cassette pickup assembly. (page 8-26) Reference[Removing
the Cassette 3/4 Pickup Assembly]
3) Remove the left deck pickup assembly.
(page 8-
30) Reference[Removing the Left Deck Pickup Assembly]
8.10.38.2 Removing the Separation Roller
0015-5248
iR5065 / iR 5055 / iR5075 / / /
1) Remove the open/close guide [3].
- 2 mounting screws [1]
- 1 feeding guide plate [2]
(Skip this step for the left deck pickup assembly)
F-8-155
2) Remove the separation roller assembly [2] from the joint.
- 2 mounting screws [1]
(For the left deck, remove one screw [3])
cassette 3/4, right deck pickup assembly
F-8-156
left deck pickup assembly
F-8-157
3) Remove the separation roller from the separation roller [1] shaft support
mount.
cassette 3/4, right deck pickup assembly
F-8-158
left deck pickup assembly
F-8-159
The urethane sponge used for this part is pink at the beginning, and changes
yellow over time (accelerated if exposed to light; it may appear to change or-
ange before turning pink). This is the common characteristic of urethane
sponge, and does not indicate physical deterioration (performance). In addi-
tion, notes that the part is not classified by color.
F-8-160
8.10.38.3 Points to Note When Mounting the Separation
Roller
0016-0020
iR5065 / iR 5055 / iR5075 / / /
When replacing the separation roller, be sure it is oriented as follows.
Mounting the separation roller in a wrong orientation may lead to interfer-
ence against the crimping washer. Make sure it is mounted in a correct ori-
entation.
Cassette 1/2, Right deck pickup assembly
F-8-161
[1] [2]
[1]
[2] [3] [1]
[1] [1] [2]
[3] [2]
[1]
[1]
urethane sponge
Wider groove
Narrower groove
(front of machine)
(rear of machine)