Canon ImageRunner 4025 Скачать руководство пользователя страница 98

Страница: 98 / 180

Consumables

The following consumables are available from Canon. For more information, contact your local authorized Canon dealer.

We recommend that you order paper stock and toner from your local authorized Canon dealer before your stock runs out.

■

●

Recommended■Paper

In addition to plain paper (11” x 17”, LGL, and LTR size), recycled paper, color paper, transparencies (recommended for

this machine), tracing paper, labels, and other types of paper stock are available. For more information, contact your

local authorized Canon dealer.

• Some commercially available paper types are not suited for this machine. Contact your local authorized Canon dealer

when you need to purchase paper.

• To prevent moisture build-up, tightly wrap any remaining paper in its original package for storage.

For high-quality printouts, use paper recommended by Canon.

■

●

Toner

If a message prompting you to replace the toner cartridge appears on the touch panel display, replace the used toner

cartridge with a new one.

Do not store paper in places exposed to open flames, as this may cause the paper to ignite, resulting in

burns or a fire .

• Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining

inside the cartridges to ignite, resulting in burns or a fire .

• Do not store toner cartridges in places exposed to open flames, as this may cause the toner to ignite,

resulting in burns or a fire .

Keep toner out of the reach of small children . If toner is ingested, consult a physician immediately .

Содержание ImageRunner 4025





















































































































































































Результаты поиска

Содержание ImageRunner 4025

Отзывы:

Canon ImageRunner 4025, Основное руководство по эксплуатации, Страница: 98 / 180

Результаты поиска

Содержание ImageRunner 4025

Отзывы: