Canon ImageRunner 4025 Скачать руководство пользователя страница 62

Страница: 62 / 180

• Paper which is curled must be straightened out before loading it into the paper deck unit.

• You will not be able to make copies or print if you load paper that exceeds the loading limit mark (

), or if the paper

drawer is not completely pushed into the machine.

• Make sure that the height of the paper stack does not exceed the loading limit mark (

• Always check that the paper drawers are in place.

• When loading paper into the paper drawer for the first time, set the paper size dial to match the paper size being loaded.

(See Adjusting a Paper Drawer to Hold a Different Paper Size: p. 63)

• The number of sheets that can be loaded in the paper drawers is 550 sheets (21 lb bond (80 g/m

)).

• If there are instructions on the paper package about which side of the paper to load, follow those instructions.

• When the paper is loaded into the paper drawer, the side facing up is the one printed on.

• If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reloading it.

• For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it),

see e-Manual > Copy.

• Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.

• If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper stack is loaded.

Содержание ImageRunner 4025





















































































































































































Результаты поиска

Содержание ImageRunner 4025

Отзывы:

Canon ImageRunner 4025, Основное руководство по эксплуатации, Страница: 62 / 180

Результаты поиска

Содержание ImageRunner 4025

Отзывы: