Canon imageRUNNER 3300 Series, Руководство по копированию

Страница: 117 / 174

2
Erasing Shadows and Frame Lines from Copies (Frame Erase)
2-33
Useful Cop
y Functions
The position of the binding holes refers not to the position in which the original is placed on
the platen glass, but to the position of the binding holes viewed when the surface of the
original that you want to scan is face up, with its top edge aligned with the top left corner of
the platen glass.
4
Set the desired binding erase width using “–” or “+,” and press “OK”
press “Done.”
When entering values in millimeters, you can use - (numeric keys) and (Clear).
Even when you enter the values with - (numeric keys), you can change the values
using “–” or “+.”
The specified mode is set and the display returns to the Basic Features screen.
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears in the screen.
NOTE
•
If you want to enter values in millimeters, press “mm.”
•
The default setting is 3/4" (18mm).
5
Press (Start).
Copying starts.
NOTE
•
To cancel the setting, press “Special Features” “Frame Erase” “Cancel,” in this order.
•
To cancel all settings and return the machine to the Standard mode, press (Reset).