Canon imageRUNNER 2535, Руководство по обслуживанию, Страница: 240 / 362

8
8
8-30
8-30
copyboard cover is being used.
This item must not be normally used. When both AB and Inch type documents are stacked
together, a separate document size sensor (photosensor) is required for the document size to
be detected properly.
When the item is set to '1', the document size is not detected while the platen is opened or
closed. (The document lighting lamp does not light.)
0: Normal (detection operation by detected size for each destination)
1: Detection of stacking of both AB and Inch type documents
● (#SCAN> READER> OPTION> BODY> SZDT-SW)
Switching mode from CCD size detection to photo size detection during platen document size
detection.
When the scanning lamp is dazzling, switch the size detection mode of the CCD unit to the
photo sensor detection mode. A photo sensor must be installed separately.
● (#SCAN> READER> OPTION> BODY> DFDST-L1)
Dirt detection level adjustment (between documents) during ADF use.
● (#SCAN> READER> OPTION> BODY> DFDST-L2)
Dirt detection level adjustment (upon job completion) during ADF use.
Increase the value when dirt fails to be detected, resulting in black streaks. However, if the
value is increased too much, even small-sized dirt of the kind which does not appear on the
image will also be detected, and the cleaning instruction screen may appear frequently.
Reduce the value if users complain because the cleaning instruction screen which appears
when dirt is detected is displayed frequently. Conversely, if the value is reduced too much,
black streaks may appear on the images.
When '0' is set, the correction control function used when dirt is detected is canceled.
● (#SCAN> READER> OPTION> BODY> KSIZE-SW)
Switch supporting Chinese paper (K sizes)
This item is used when K size paper is used. Detect and display Chinese paper (8K, 16K).
0: K size paper is not supported.
1: K size paper is supported.
● (#SCAN> READER> OPTION> USER> SIZE-DET)
Document size detection function ON/OFF setting
This item is used when the user asks for the item to be provided (as a means to remedy the
glare from the document lighting lamp). Set the document size detection function to ON and
OFF.
● (#SCAN> READER> OPTION> USER> SIZE-DET)
Document size detection function ON/OFF setting
When requested by the user (the scanning lamp is dazzling). Turn ON/OFF the document
size detection function.
● (#SCAN> FEEDER> ADJUST> DOCST)
Adjusting the original stop position for ADF pickup (original tray pickup)
Delivering the original enables the setting. Be sure to press the OK key to deliver the original.
When changing the setting, input the setting on the main station service label.
The larger the value, the smaller the leading edge margin.
● (#SCAN> FEEDER> ADJUST> LA-SPEED)
Adjusting the original feeding speed in stream reading
Use this mode to adjust the original feeding speed in stream reading mode.
The larger the setting, the faster the speed (the image reduced).
● (#SCAN> FEEDER> ADJUST> DOC-LNGH)
Correcting the paper length in extra length/indeterminate mode with ADF
Use this mode when installing the ADF. (to correct errors in detecting the paper length in extra
length/indeterminate mode with ADF)
● (#SCAN> FEEDER> FUNCTION> MTR-CHK)
Operation check for the ADF motor, etc.
Specify a motor to perform an operation check. Select #SCAN> FEEDER> FUNCTION>
MTR-ON to execute this.
0:Pickup/ Feed motor (M1)
1:Release motor (M2)
● (#SCAN> FEEDER> FUNCTION> FEED-CHK)
Checking passage of paper by the ADF
Specify a paper feed mode to check the DF for paper passage. Select #SCAN> FEEDER>
FUNCTION> FEED-ON to execute this.
0:1-sided
1:2-sided