Canon imageRUNNER 2535, Руководство по обслуживанию, Страница: 201 / 362

7
7
7-7
7-7
Ecode Detail
Code
Item Description
E542 0005 Title Additional Tray Lift Motor (M12) closing detect switch error
Description The FG input cannot be detected when the Additional Tray
Lift Motor (M12) has been driven for 0.1 second.
Remedy 1.Replace the Additional Tray Clock Sensor (S23).
2.Replace the Additional Tray Lift Motor (M12).
3.Replace the Finisher Controller PCB (PCB1).
E567 0001 Title Shift Roller Release Motor (M5) error
Description The shift roller does not leave the shift roller release home
position when the Shift Roller Release Motor (M5) has been
driven for 0.1 sec.
Remedy 1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
E567 0002 Title Shift Roller Release Motor (M5) error
Description The shift roller does not return to the shift roller release home
position when the Shift Roller Release Motor (M5) has been
driven for 0.06 sec.
Remedy 1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
E571 0001 Title Gripper Open/Close Motor (M7) error
Description The gripper unit does not leave the gripper unit home position
when the Gripper Open/Close Motor (M7) has been driven for
0.25 seconds.
Remedy 1.Replace the Grip Arm Sensor (S13).
2.Replace the Gripper Open/Close Motor (M7).
3.Replace the Finisher Controller PCB (PCB1).
E571 0002 Title Gripper Open/Close Motor (M7) error
Description The gripper unit does not return to the gripper unit home
position when the Gripper Open/Close Motor (M7) has been
driven for 0.15 seconds.
Remedy 1.Replace the Grip Arm Sensor (S13).
2.Replace the Gripper Open/Close Motor (M7).
3.Replace the Finisher Controller PCB (PCB1).
E575 0001 Title Gripper Unit Move Motor (M2) error
Description The gripper unit does not leave the gripper unit home position
when the Gripper Unit Move Motor (M2) has been driven for
3.8 seconds.
Remedy 1.Replace the Gripper Unit HP Sensor (S7).
2.Replace the Gripper Unit Move Motor (M2).
3.Replace the Finisher Controller PCB (PCB1).
Ecode Detail
Code
Item Description
E575 0002 Title Gripper Unit Move Motor (M2) error
Description The gripper unit does not return to the gripper unit home
position when the Gripper Unit Move Motor (M2) has been
driven for 0.1 seconds.
Remedy 1.Replace the Gripper Unit HP Sensor (S7).
2.Replace the Gripper Unit Move Motor (M2).
3.Replace the Finisher Controller PCB (PCB1).
E602 0001 Title The built-in SD card is not detected
Description -
Remedy -
E602 1105 Title Access to the built-in SD card failed
Description -
Remedy -
E711 0001 Title Error in UFDI communication
Description The communication system error (such as reception timeout
or checksum error) occurred.
Remedy 1.Check and Replace the cable.
2.Replace the DC Controller PCB (PCB4).
3.Replace the Finisher Controller PCB.
E713 0000 Title Erroneous communication with finisher
Description The communication does not restart by the error retry after
the communication failure with the finisher.
Remedy 1.Check the cable.
2.Replace the DC Controller PCB (PCB4).
3.Replace the Finisher Controller PCB.
E716 0000 Title Erroneous communication with optional cassette or 2-way
unit
Description After the presence of a cassette pedestal or a 2-way unit has
been detected, the communication fails to be normal for 5
sec.
Remedy 1.Check the cable.
2.Replace the DC Controller PCB (PCB4).
3.Replace the Cassette Pedestal Driver PCB.
4.Replace the 2-way unit driver PCB.
E716 0010 Title Failure of the communication with the 2-way unit
Description When the communication with the 2-way unit is faulty after
detecting the connection with the finisher.
Remedy 1.Install the 2-way unit.
2.Check the cable.
3.Replace the DC Controller PCB (PCB4).
4.Replace the 2-way unit driver PCB.
E719 0000 Title Erroneous communication with New Card Reader (serial
communication)
Description -
Remedy -