Canon imageRUNNER 2230, Справочное руководство

Страница: 97 / 460

Making Prints Using the Stack Bypass 2-35
2
Basic Operati
ons
IMPORTANT
•
If the paper retaining lever is not set securely, a paper jam may occur, or paper may
be fed from a paper drawer instead of the stack bypass.
•
When loading paper into the stack bypass, align the paper stack neatly between
the slide guides. If the paper is not loaded correctly, a paper jam may occur.
•
If you are printing on heavyweight paper or envelopes using the stack bypass, and
find that the paper or envelopes are not being fed smoothly or evenly through the
stack bypass, remove the paper or envelopes, curl the feeding edges upward
approximately 1/8" (3 mm), and then reload the paper or envelopes. Curling the
feeding edges enables the rollers to grip the paper or envelopes as they are fed
into the stack bypass.
NOTE
•
If there are instructions on the paper package about which side of the paper to
load, follow those instructions.
•
When the paper is loaded into the stack bypass, the side facing down is the one
printed on.
•
If problems, such as poor print quality or paper jams occur, try turning the paper
stack over and reload it.
•
For more information on the print direction of preprinted paper (paper which has
logos or patterns already printed on it), see "Relationship between Original
Orientation and Preprinted Paper Output Chart," on p. 9-11.
●
If you are loading envelopes into the stack bypass:
❑
Take five envelopes, loosen them as shown, and then stack them together.
Repeat this step five times for each set of five envelopes.