background image

Performing/Changing Wired LAN Connection (Ethernet Cable)
Settings

Follow the procedure below to perform/change wired LAN settings.

Note

• For some models, you can perform network setup for a USB connected printer using IJ Network Device

Setup Utility. Select 

USB

 on 

Switch View

 under the 

View

 menu to display printers for which you can

perform setup.

1.

Start up IJ Network Device Setup Utility.

2.

Check the displayed message and select 

Yes

.

3.

Select 

Printer Network Setup

 on the displayed screen.

Detected printers are listed.

4.

Select printer to perform/change settings from printer list.

Select the printer with 

Wired LAN

 displayed on 

Connection Method

 and 

Available

 displayed on 

Status

to perform settings.

You can perform settings for a printer with 

Available

 not displayed on 

Status

 via USB connection.

To perform setup for a USB connected printer, select 

USB

 from the pulldown menu on the toolbar and

select the printer to perform/change settings.

5.

Select 

Network Settings...

 on 

Printer Settings

 menu.

The 

Confirm Printer Password

 screen appears.

For more on the password, refer to Administrator Password.

Note

• Clicking the 

 icon allows you to perform/change settings.

• If you select a USB connected printer on step 4, the screen below appears after the 

Confirm

Printer Password

 screen appears

Select 

Wired LAN

 and click 

OK

.

6.

Enter password and click 

OK

.

The 

Network Settings

 screen appears.

299

Содержание imagePROGRAF TM-200



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы: