Canon ImagePRESS Server H350 V2, Руководство по обслуживанию

Страница: 43 / 117

2. Release the six tabs and pull the front bezel off.
1
2
3
Figure 25: Front bezel tabs
No. ITem
1 Top tab (one on each side of bezel)
2 Middle tab (one on each side of bezel)
3 Bottom tab (one on each side of bezel)
■ To replace the chassis panels
1. Attach the front bezel to the front of the unit snapping tight the six tabs. See “To remove the front panel” on page 35 .
2. Insert the anchor screw to secure the front bezel. See “To remove the front panel” on page 35 .
3. Slide the right chassis cover into place and secure with two screws on backside of the unit.
4. Slide the left chassis cover into place and secure with two screws on backside of the unit.
■ Fiery QuickTouch display module
Fiery QuickTouch is attached to the top panel of the imagePRESS Server .
Follow the directions to remove the chassis covers. See “Opening the imagePRESS Server” on page 34 . You will need to remove
the side covers, then the front cover before you will be able to release the top bezel with the Fiery QuickTouch attached.
4. REPLACING PARTS
36