2
2
Check Items when Turning OFF the Main Power
Check Items when Turning OFF the Main Power
How to Check this Installation Procedure
When Using the Parts Included in the Package
A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item
Symbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
Connector
Disconnect
Screw
Tighten
Remove
Connect
Secure
Free
Harness
Push
Insert
Plug in
Turn on
Sound Check
Check
Visual Check
Claw
Remove
Checking instruction
F-1-1
F-1-2
Before Connection
The IP addresses for communication between the host
machine and server are set automatically
1) Enter the Service Mode (level 1).
2) COPIER > OPTION > INT-FACE > IMGCONT> "3"
3) Exit the Service Mode
Securing space for installation
Secure a space to install this equipment as shown in the figure below. A space of 200mm or
more is required from the back of this equipment.
200mm or more
Rear
Equipment
Front
Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn OFF the main power switch of the host machine.
2) Be sure that display in the Control Panel and the lamp of the main power supply are turned
off, then disconnect the power plug.
F-1-3
