81
Problem 11
Memory becomes insufficient and scanning stops.
Solutions
If you configure scanning conditions that use a large
amount of the computer’s memory, scanning may stop
because of insufficient memory. Although this depends
on the computer’s memory size, the possibility of
insufficient memory increases if any of the following
scanning conditions overlap.
• [Color Mode] is set to [24-bit Color]
• A large page size (e.g. Legal) is specified as the
[Page Size]. Alternatively, the page size is set to
[Scanner’s Maximum].
• A high resolution (600dpi etc.) is specified for [Dots
per inch].
If an error message appears due to insufficient memory
while scanning is in progress, exit the application,
change the scanning conditions (e.g. reduce the
resolution or page size) and then try scanning again. In
addition, the amount of memory used can be contained
by turning off [Moire Reduction] and [Prevent Bleed
Through/Remove Background] if they are set to on.
Problem 12
Double-feeding occurs when scanning a document
with multiple pages.
Solutions
Press the scanner's DFR button to continue the scan,
or clear the [Detect by Ultrasonic] check box on the
scanner driver settings screen.
Problem 13
Passport cannot be scanned as intended
Solutions
Depending on the condition of the carrier sheet or
passport, the image may not be scanned completely or
the scanner's image correction may not function
properly.
Configure the settings as shown below.
(1) Set [Page Size] to a larger paper size (A4, for
example) on the scanner driver settings screen, and
then scan again.
(2) Set [Dots per inch] to 300 dpi or less on the scanner
driver settings screen.
(3) If you scanned the side of the passport with less
pages facing down, load the side of the passport with
more pages facing down into the feeder.
Содержание imageFORMULA DR-C240
Страница 90: ...90 Dimensions 231 mm 9 09 291 mm 11 46 603 mm 23 74 363 mm 14 29 ...
Страница 92: ...92 U Uninstall 87 ...