7
S C A N N I N G B A S I C S
1
S T E P
1
Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.
▲
A U T O M A T I C F E E D I N G
S T E P
2
From the application you are using, execute the required command to
start scanning. The [Start] key lamp will turn green.
▲
S T E P
3
Load the document into the document feeder tray. Scanning will start
automatically when the sensor on the document feeder tray detects
the document.
▲
S T E P
4
When scanning of the document is complete, the scanner goes into
Ready Mode. If you wish to scan another document, repeat step 3.
To finish scanning, press the [Stop] key.
▲