![background image](http://html2.mh-extra.com/html/canon/imageformula-cr-150/imageformula-cr-150_user-manual_4210261055.webp)
55
Check Path Cleaning
Follow the procedures below to perform check path cleaning.
A
Confirm that the scanner is set to the cleaning mode. (See
“Prepare for the Cleaning mode,” on p. 54)
B
Press the Separation OFF Mode Button.
C
Place the cleaning card (for Check Path Cleaning) in the
document tray.
D
Press the START Button to start cleaning.
E
Please repeat steps 3 and 4.
A typical cleaning is feeding the cleaning card 3 to 7 times. If the
scanner is extremely dirty, you may need to use another cleaning
card.
F
Turn OFF the scanner.
NOTE
Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from
the cleaning card to thoroughly dry before scanning documents.
Card Path Cleaning
Follow the procedures below to perform card path cleaning.
A
Confirm that the scanner is set to the cleaning mode. (See
“Prepare for the Cleaning mode,” on p. 54)
B
Press and hold the FUNCTION Button.
Press and hold the Function button for at least 2 seconds, and then
release it.
If the scanner is set to the Card Path Cleaning mode properly, the
POWER LED and the START LED continues to blink.
Separation OFF
Mode Button