Canon imageCLASS MF5550, Основное руководство

Страница: 84 / 136

Periodic Cleaning 8-3
Maintenance
8
Cleaning the ADF Area
Black lines may appear in copies when the ADF is used to feed documents.
This is caused by paste, ink, correction fluid, or other foreign matters in the read
area of the platen glass (shaded area). Use a clean soft cloth to wipe the read area
clean. Take particular care to clean at the locations where the black lines are
appearing on copies.
If you have trouble getting the glass clean, wipe with a cloth moistened with water
or a mild neutral detergent, and then wipe the glass dry with another cloth.
IMPORTANT
Paste, ink, correction fluid, and other foreign matter can soil the platen glass when you
send a document through the ADF while the paste, ink, or correction fluid on the
document is still wet. This is what causes black lines on copies. Whenever you load a
document in the ADF, always check to make sure that any paste, ink, or correction fluid
that is on the document is completely dry.
When cleaning the read area of the platen glass, take care not to damage the white roller
located on the center of the ADF.
Paste, ink,
correction fluid,
etc.
Read area
Copy
Black lines
White roller
LD_Basic_US.book Page 3 Friday, December 5, 2003 5:52 PM