Canon imageCLASS LBP325dn, Руководство по обслуживанию

Страница: 109 / 252

Error Message List
Error information displayed on the communication error log detail screen is shown below.
(The "server" described here means UGW.)
Code Character strings Cause Remedy
0000
0000 SUSPEND: mode changed. Operation mode mismatch Execute initialization of the E-RDS settings
(CLEAR).
0500
0003 SUSPEND: Communication test
is not performed. E-RDS was enabled, but the main power of
the device was turned OFF and then ON
without performing a communication test. Perform and complete a communication test
(COM-TEST).
0xxx 0003 Server schedule is not exist The schedule does not exist. Perform and complete a communication test
(COM-TEST).
0xxx 0003 Communication test is not per-
formed
Communication test has not been comple-
ted. Perform and complete a communication test
(COM-TEST).
84xx 0003 E-RDS switch is setted OFF E-RDS is not enabled. Set the value of the E-RDS setting (E-RDS
SWITCH) to ON, and perform a communi-
cation test (COM-TEST).
8600
0002
8600
0003
8600
0101
8600
0201
8600
0305
8600
0306
8600
0401
8600
0403
8600
0414
8600
0415 Event Registration is Failed Processing in the device (event processing)
failed. Turn OFF and then ON the power of the de-
vice. If the error occurs again after turning
OFF and then ON the power, replace the
system software of the device (version up-
grade).
8700
0306 SRAM version unmatch! An invalid value has been entered at the
beginning of the NVMEM area of E-RDS
(nonvolatile memory area). Turn OFF and then ON the power of the de-
vice.
8700
0306 SRAM AeRDS version unmatch! An invalid value has been entered at the
beginning of the NVMEM area of E-RDS
(nonvolatile memory area).
Turn OFF and then ON the power of the de-
vice.
8xxx 0004 Operation is not supported The user tried to execute a method which is
not supported by E-RDS. Collect Debug log and contact the Support
Dept. of the sales company.
8xxx 0101 Server response error ( NULL ) UGW reply error: Processing of the UGW
error code failed. Perform and complete a communication test
(COM-TEST).
8xxx 0201
8xxx 0202
8xxx 0203
8xxx 0204
8xxx 0206 Server schedule is invalid The schedule specified by UGW is invalid. Report the detailed information at the time of
occurrence of the error to the Support Dept.
Perform a remedy on the UGW side, and
then perform a communication test again.
8xxx 0207
8xxx 0208 Internal Schedule is broken The internal schedule of E-RDS is invalid. Perform and complete a communication test
(COM-TEST).
8xxx 0221 Server specified list is too big The information the UGW server instructed
to send for the alert code/alarm code filter
function is invalid. There is a problem with the alarm filter set for
UGW. Contact the Support Dept. of the sales
company.
8xxx 0222 Server specified list is wrong The information the UGW server instructed
to send for the alert code/alarm code filter
function is invalid. There is a problem with the alarm filter set for
UGW. Contact the Support Dept. of the sales
company.
8xxx 0304 Device is busy, try later A semaphore consumption error occurred
during a communication test. Wait for a while and then perform a commu-
nication test again.
3. Technical Explanation (System)
99