DR-3010C
DR-3010C
72
3
Open the roller cover inside the front unit using your finger.
4
Lift up the roller fixing lever (
c
), and slide it to the right (
d
).
5
Remove the retard roller by moving it to the right to detach it from its shaft,
and pull it out.
Attaching the Retard Roller
1
Insert the retard roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the front unit.
2
Slide the roller fixing lever to the left to lock the roller into the hole on the
left of the retard roller.
3
Push down the lever to lock the shaft of the feed roller into place.
b
a
