Canon im2020, Инструкции по установке

Страница: 123 / 143

– 14 –
4513-7746-02
• Registering one-touch keys
1. Press the [Utility] key.
2. Touch [User Set], [FAX Input], then [One-Touch].
(With the im2020, im2520 and im3520 , touch [User Set], [Mail Input], then
[One-Touch].)
3. Touch a key where nothing has been registered yet.
4. Type in the name of the one-touch key.
5. Select the communication mode.
• Scan to E-mail : [PC] - [Email]
• Scan to Server (FTP) : [PC] - [FTP Server]
• Scan to PC (FTP)
: [PC] - [FTP Client]
• Scan to PC (SMTP) : [PC] - [Scanner]
• Scan to HDD : [HDD]
• Internet FAX : [InternetFAX] - [E-mail]
• IP Address FAX : [InternetFAX] - [IP-TX]
6. Specify the necessary settings for the selected communication mode.
7. Touch [Enter].
7.3 Operation Checks After Setting
When the setup procedures for controller and user environment have been completed,
make the operation checks to ensure that the setup has been made correctly.
Test printing from client PC
This check is made to make sure that the connection with the PC has been properly
made.
• Select “Start” - “Settings” - “Printers” on the client PC and then right-click the Printer
icon to open the property.
• Select the “General” tab and click “Print Test Page.”
If printing is not effected, see “Troubleshooting at Installation.”
7.4 Troubleshooting at Installation
■
Printing Functions
When printing cannot be effected over the network
Check Possible Cause Action
1 Is the print job
included in the
Job List on the
copier control
panel?
Yes An error on copier side
(paper running out, toner
running out, etc.
Correct the error.
Waiting its turn Check the copier control panel
for jobs in print queue.
The job is locked. Enter the password to unlock the
job.
No The correct Access
Number of the Account
has not been entered.
Enter the correct Access Number
of the Account that has been reg-
istered with the copier.
Data is yet to be
received. Go to item 2.
2 Is the
response of
Ping sent from
the PC to the
copier?
Yes The print destination port
setting is wrong.
Set the correct port.
PC operates erratically
temporarily. Restart the PC.
Printer driver is not
installed correctly. Uninstall the printer driver
through the proper steps and
then reinstall it properly.
No Controller board oper-
ates erratically tempo-
rarily.
Restart the controller board.
(Turn OFF the Power Switch of
the copier and then turn it ON.)
Network cable is discon-
nected or a relay device
is faulty. Reconnect the cable and restart
or change the faulty relay device.
IP address and/or subnet
mask incorrectly set. Set the correct IP address and
subnet mask.
Controller board is faulty. Change the controller board.