25
About “Paper Size” and “Paper Type”
To change the paper size or paper type, operate the camera to select the PictBridge print setup mode and
confirm or check the settings.
By default, 10×15cm / 4"×6" is selected in “Paper Size” and “Photo “(Photo Paper Plus Glossy) is
selected in “Paper Type” for this printer.
To use Photo Paper Pro, select “Fast Photo” in “Paper type”.
The following sizes and types of paper can be loaded in the printer by selecting options in “Paper Size”
and “Paper Type”.
About “Layout” and “Trimming”
By default, “Borderless” is selected in “Layout” and “Off (No trimming)” is selected in “Trimming” for
this printer.
About “Image optimize”
By default, “On (Exif print)” is selected for this printer.
About “Date print”
By default, “Off” is selected for this printer.
“Paper Size” setting
“Paper Type” setting
Paper loaded in printer
10×15cm / 4"×6" (Default)
Photo (Default)
Photo Paper Plus Glossy
Fast Photo
Photo Paper Pro
13×18cm / 5"×7"
Photo
Photo Paper Plus Glossy
A4
Photo
Photo Paper Plus Glossy
Fast Photo
Photo Paper Pro PR-101
• This printer can handle only Exif/JPEG image data to produce photos using PictBridge.
• Never disconnect the USB cable during printing.
• When disconnecting the USB cable between the digital camera and printer, follow the instructions
given in the Instruction Manual.
• Controls of the digital camera cannot be used for the following:
- Print quality setting
- Printer maintenance
i80.fm Page 25 Monday, September 29, 2003 4:59 PM
