Canon I470D - i Color Inkjet Printer Скачать руководство пользователя страница 40

Страница: 40 / 43

Cannot Print Properly from the Digital Camera

The following messages may be displayed on the digital cameras or digital video camcorders when

images are printed directly from them. Take the appropriate action to correct the error.

• Images can be printed directly from Canon “Bubble Jet Direct” compatible digital cameras and

digital video camcorders connected to this printer.

• If the connected digital camera or digital video camcorder does not support “Bubble Jet Direct” the

Power

lamp on the printer will flash eleven times. If this happens, disconnect the connection cable

and press the

Resume

button.

• If the operation time or data transmission time is too long when the digital camera or digital video

camcorder is connected to this printer, a communication time error may occur and no more images

can be printed. If this error occurs, press the

Resume

button.

The digital camera will automatically turn on. If not, turn it on.

• A low ink warning is not displayed on the digital camera.

• After replacing an ink tank, cancel the connection with the digital camera and reset the ink counter.

See “Reset the ink counter.” on page 32.
If the ink counter is not reset, the remaining ink level may not be displayed properly.

• For more details, also refer to the user’s manual for the digital camera or digital video camcorder.

Error message on

camera

Try This

Printer in use

Images are printed from the computer.
Wait until printing ends.

Printer warming up

Wait until warm-up ends.

No Paper

Load the paper in the printer and press the

Resume

button on the

printer.

Paper Jam

Remove the jammed paper, load new media, and press the

Resume

button.

Printer cover open

Close the front cover.

No print head

No print head is installed. (The

Power

lamp on the printer flashes six

times.) Install a print head according to the Quick Start Guide.

The print head is defective. (The

Power

lamp on the printer flashes

seven times.) Contact a Canon service representative.

Waste tank full

The waste ink tank is nearly full.
Press the

Resume

button on the printer to recover from the error.

Contact a Canon service representative as soon as possible.

Paper lever error

Incorrect position of the paper thickness lever.
Open the front cover and adjust the paper thickness lever to the left
position.

Printer error

An error requiring servicing has occurred. (The

Power

lamp on the

printer flashes alternately orange and green.)
Turn off the printer, unplug the power cord from the power supply, plug
the power cord back in, and then turn on the printer. If the same error
occurs, contact a Canon service representative.

Содержание I470D - i Color Inkjet Printer












































Результаты поиска

Содержание I470D - i Color Inkjet Printer

Отзывы:

Бренды по названию

Популярные бренды

Canon I470D - i Color Inkjet Printer, Руководство по печати

Результаты поиска

Содержание I470D - i Color Inkjet Printer

Отзывы:

Бренды по названию

Популярные бренды