Canon I470D - i Color Inkjet Printer Скачать руководство пользователя страница 35

Страница: 35 / 43

6666

Close the front cover.

If you have replaced both black and color ink tanks, press the cursor buttons and after both ink tanks

have the

mark set above them, press the

Set

button.

Resetting the Ink Counter in the Maintenance Mode

If you have closed the front cover after replacing an ink tank, reset the ink counter in the maintenance

mode as described below.

(1) Press the

Maintenance

button.

(2) Press

four times to display

. Next, press

the

Set

button. Then,

appears above the ink

tank on the operation panel.

(3) Using the cursor buttons, locate

above the

replaced ink tank.

Next, press the

Set

button.

A full ink tank icon appears under

and the

counter is reset.

If you have replaced both black and color ink
tanks, reset the ink counters of both ink tanks in

the same manner as above.

(4) Press the

Maintenance

button.

Now you are finished with resetting of the ink

counter.

Содержание I470D - i Color Inkjet Printer












































Результаты поиска

Содержание I470D - i Color Inkjet Printer

Отзывы:

Бренды по названию

Популярные бренды

Canon I470D - i Color Inkjet Printer, Руководство по печати

Результаты поиска

Содержание I470D - i Color Inkjet Printer

Отзывы:

Бренды по названию

Популярные бренды