Canon HJ40E, Руководство по эксплуатации

Страница: 92 / 186

E90
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote: 90
Auto: 50
[ ]
[ I-Gain ]
Iris
Remote: 90
Auto: 50
[ ]
[ I-Gain ]
Iris
Remote: 90
Auto: 71
[ ]
MENU
[ I-Gain ]
[Trk]OFF
[ ]
MENU
1
A
Fr1P
[ Basic ]
IS STD IS STD
[ ] 1
IS STD IS STD
A
Fr1P
Shtl VTR
A 1 V
[ I-Gain ]
4.1.9 Specifying Iris Gain
[I-Gain]
Specifying Auto Iris Gain
Although this value is factory-set, it can be adjusted as needed.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations.
Regardless of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch users
in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Options
01 to 99
Description
Minimum gain Maximum gain
Default: Varies depending on the factory-set value, but corresponds to the value determined with the iris gain adjustment trimmer.
MENU
× 3
[I-Gain]
or
Note: Do the following when
adjusting gain while checking
iris operation.
→ Con fi rm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Auto].
Note: As you look at the lens iris
ring, set it to the position of
maximum gain at which “ focus
hunting ” does not occur.
Note: The current iris gain value
is retained even if you reset
other settings as described in
“ 4.2.1 Resetting Values. ” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
1
2
3
4
5
Press three times and
once.
Your selection is now highlighted.
Press .
The display switches to the [I-Gain]
screen.
Press .
[Auto] is underlined.
The previous or default value is
highlighted.
Press or .
Press left or right until you reach the desired value.
Press .
The display reverts to Screen A.
Initial Top Screen
Screen A
[I-Gain] Screen