manualshive.com logo in svg

Canon GP335, Руководство по обслуживанию

Поделиться
Скачать
Canon GP335 Скачать руководство пользователя страница 637

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

14-219

CHAPTER 14  TROUBLESHOOTING

<FUNCTION>

FEEDER

Level 3

SENS-INT

UBLT-CLN

DBLT-CLN

REf.

See Standards and
Adjustments in the
DADF Service
Manual.

Description

Executes auto sensitivity adjustment for the RDF sensor
(initialization).

Execute this mode if you replaced the DADF controller
PCB, original tray paper sensor (S1), or registration sensor
(S3); further, if you have replaced the DADF controller
PCB, you will have to perform additional steps.

The specifics of this adjustment are the same as those made
using the DIP switch on the DADF controller PCB.
1) Remove the DADF controller cover, and find out the

location of LED 1/2.

2) Select the item, and press the OK key.
3) Check that the machine executes the mode and stops

automatically.

Executes separation belt cleaning mode for DADF top
pick-up.

n

Operation

1) Select UBLT-CLN to highlight.
2) Moisten the center of paper with solvent, and place the

paper on the original tray of the feeder.

3) Press the OK key. The original will be fed to the

middle, and the top pick-up separation belt will rotate
idly.

4) Press the OK key to stop the operation.
5) Open the feeder upper cover, and remove the paper;

then, close the upper cover.

Executes separation belt cleaning mode for DADF bottom
pick-up.

n

Operation

Same as <UBLT-CLN>.

Содержание GP335











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды