Canon GP335 Скачать руководство пользователя страница 379

Страница: 379 / 682

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

12-21

CHAPTER 12 INSTALLATION

No.

Remarks

Press the Copy Start key to execute.
•

The output will be used later for PD-ME. (Do not use
it for DZ-ME.)

Caution:
•

Be sure to use the PD-DENS output for PD-ME
reading.

•

Place the printed side down.

•

The white side must be the leading edge and black, the
trailing edge.

•

Set the PD-DENS output against the V marking in the
left rear of the copyboard glass.

Work

Select PD-DENS, and press the
Copy Start key.
•

A PD pattern will be generated.

1) Place the PD-DENS output on

the copyboard glass as shown.

2) Close the feeder or the

copyboard glass.

3) Select PD-ME, and press the

OK key.

•

The scanner makes 13 scans.

•

The notation "OK" will be
indicated to the right of "PD-
MDE" to end reading.

•

If the operation ended in NG,
refer to the Service Manual.

•

Be sure to execute DZ auto
density adjustment (DS-DENS,
DZ-ME).

PD-DENS output

In practice,
place it face
down.

Содержание GP335






































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GP335

Отзывы:

Бренды по названию

Популярные бренды

Canon GP335, Руководство по обслуживанию

Результаты поиска

Содержание GP335

Отзывы:

Бренды по названию

Популярные бренды