manualshive.com logo in svg

Canon FY8-13HW-000, Руководство по обслуживанию

Поделиться
Скачать
Canon FY8-13HW-000 Скачать руководство пользователя страница 23

COPYRIGHT © 2002 CANON INC. 

2000 2000 2000 2000

 NM-PDL REV.0 JULY 2002

CHAPTER 2 PREPARING FOR INSTALLATION

2-6

3 Unpacking the iR-M2

The iR-M2 is assembled and shipped from the factory in a box that includes all necessary

cables and documentation, as shown in F02-301-01 on page 2-7.

3.1 To Unpack the iR-M2

1. Open the box and remove the packing material.

You may want to save the original boxes and packing materials if you need to transport
the iR-M2 at a later date.

2. Remove the contents from the top container. Inspect the contents for visible damage.

The top container should include the following items:
• Bags containing one copier interface cable and one AC power cable
• Network Interface Adapter
• Media package (includes CDs for user software, user documentation and system soft-

ware CD)

System software is for service use only.

3. Give the media package to the customer or the network administrator.

Let the customer or network administrator know that in order to take full advantage of
the iR-M2, the user software must be installed on computers that will print to the iR-
M2.

4. Set aside the remaining components from the top container.
5. Remove the top container and any packing materials.

Set aside the packing material and note the orientation of the iR-M2 inside the shipping
container, in case you need to repack it later.

6. Carefully lift the iR-M2 out of the box.

If you notice shipping damage to any component, be sure to save the shipping container
in case the carrier needs to see it. Call the carrier immediately to report the damage and
file a claim, then call your authorized service/support center. Be ready to furnish the se-

Chapter_02.P65

02/07/25, 11:50

6

Содержание FY8-13HW-000














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды