Canon Finisher-R1, Руководство по обслуживанию

Страница: 105 / 177

Chapter 4
4-30
F-4-103
1) Remove screw [1] and remove the stopper [2].
F-4-104
2) Remove two screws [3] and disconnect two
connectors [4].
3) Insert your finger in the hole at the rear side of tray
2 [5], push the tray lift motor gear [6] to the front to
release the clutch and lift tray 2 [5]
When the tray lift motor gear clutch is released the
tray drops by its own weight. Therefore, hold the
tray with your hand when releasing the clutch.
Also, be careful not to twist the tray cable when
installing.
F-4-105
4.3.4 Buffer Roller
4.3.4.1
Removing the Front
Cover
0004-8075
1) Remove screw [1] and remove the foot cover [2].
F-4-106
2) Open the front door [3] and remove three screws
[4].
[3]
[2]
[1]
[1]
[2]