background image

Chapter 7

Sending Faxes

7-15

Sending F

a

x

e

s

Delayed Sending

Your machine allows you to scan a document into its memory and send it automatically
to as many as 116 fax numbers at a preset time within the next 24 hours. This is called
Delayed sending or Timer sending. By using this feature, you can take advantage of
lower long distance rates at night, for example.

n

To use delayed sending correctly, make sure the correct time is set on your machine 
(

1

p. 3-6).

Scanning a Document into Memory for Delayed
Sending

Follow this procedure to scan a document into the machine’s memory for delayed
sending:

1

Load the document, face down in the 
ADF (

1

p. 4-3).

• To adjust the resolution and contrast, 

(Currently used memory)

see pp. 7-2, 7-3.

• You may be unable to scan if the 

memory used (shown in the LCD) is 

(Standby to scan)

close to 

100%

. To free up space in the 

machine’s memory: print, send, or delete any 
documents you no longer need to be 
stored in memory (

1

p. 9-4).

2

Press Function.

3

Press Delayed Transmission.

4

Press Set.

5

Use the numeric buttons to enter the
time at which you want to send the
document.

• Use the 24-hour format for the time 

(e.g. 11:30 p.m. as 23:30), and precede
single digits with a zero.

6

Press Set.

TEL=

SELECT LOCATIONS

SET TIME

22:30

SET TIME

15:00

REGISTER

DOCUMENT READY

MEMORY USED 0%

Содержание FAXPHONE L80












































































































































































































Отзывы: