Canon FAX L200 Скачать руководство пользователя страница 93

Страница: 93 / 212

Chapter 7

Sending Faxes

7-15

Sending Faxes

Enter up to 125 fax numbers you want
to send to using any of the following
methods:

❚

One-touch speed dialling:

Press the one-touch speed dialling

Ex:

button(s) you want.

❚

Coded speed dialling:

Press

Coded Dial

, then use the

Ex:

numeric buttons to enter the two-
digit code you want. Repeat for other

Ex:

codes.

• Be sure to press

Coded Dial

before

each code.

❚

Regular dialling:

Use the numeric buttons to enter the

Ex:

fax number you want, then press

Set

• You can only enter one fax number this

way.

• If you enter the wrong

destination, press

Clear

, then

enter the correct destination.

• To review the destinations

entered, use

∂

to scroll

through the numbers.

Press

Start/Copy

to begin scanning

the document into the FAX’s memory.

• When the preset time is reached, the

FAX sends the document to the
destination(s) you specified in step 7.

• You can register up to 20 different delayed sending operations.
• If the FAX’s memory becomes full while scanning your document,

MEMORY FULL

will

appear in the LCD. If this happens, you will not be able to send the document at a preset
time. Remove the remainder of the document from the ADF (you may need to open the
operation panel to do so).

• Since the FAX is multitasking, you can perform other tasks even when your FAX is set

for delayed sending.

TEL=

2 887 0166

TEL=03 3758 2111

TEL=905 795 1111

Содержание FAX L200





















































































































































































































Результаты поиска

Содержание FAX L200

Отзывы:

Canon FAX L200, Руководство пользователя, Страница: 93 / 212

Результаты поиска

Содержание FAX L200

Отзывы: