Canon FAX L200 Скачать руководство пользователя страница 175

Страница: 175 / 212

Chapter 13

Troubleshooting

13-19

roubleshooting

You may not have removed the plastic seal from the toner cartridge.

• Make sure you install the toner cartridge properly (

p. 2-11).

The toner cartridge may need to be replaced.

• Replace the toner cartridge (

p. 12-7).

■

Printout does not match paper size.

The paper may not be loaded correctly.

• Make sure the paper stack is loaded correctly in the multi-purpose tray (

p. 2-14).

■

Printout is skewed.

The paper may not be loaded correctly.

• Make sure the paper stack is loaded correctly in the multi-purpose tray (

p. 2-14).

• Make sure the paper delivery slots are clear.

■

Paper jams occur.

You may not be using the correct paper delivery slot.

• Select the correct paper delivery slot (

p. 5-4).

■

Printout is not clear.

You may not be using the correct paper type.

• Make sure you load paper that meets the requirements for the FAX (

p. 5-2).

You may be printing on the wrong side of the paper.

• Some papers have a “right” side for printing. If the print quality is not as clear as you

would like it to be, try turning the paper over and printing on the other side.

■

Printout has vertical white streaks.

Toner may be low or unevenly distributed.

• Redistribute the toner inside the toner cartridge (

p. 12-7). If the problem persists,

replace the toner cartridge (

p. 12-7).

Содержание FAX L200





















































































































































































































Результаты поиска

Содержание FAX L200

Отзывы:

Canon FAX L200, Руководство пользователя, Страница: 175 / 212

Результаты поиска

Содержание FAX L200

Отзывы: