Canon External 2/3 Hole Puncher-B1, Руководство по обслуживанию

Страница: 69 / 72

3
2 General Circuit Diagram
Signal Names
List of Signal Names/Abbreviations
The following presents the abbreviations of signals used in this manual and in drawings, and the meaning of each signal.
Reference: Signals enclosed by brackets [ ] are electrical signals, However, the state "1" or "0" of these analog signals cannot be indicated. Otherwise, the state of digital signals "1" or "0" can be indicated.
T-2-1
DFULL DUST FULL DETECT Signal
FDROPN FRONT DOOR OPEN DETECT SWICH Signal
LEDON LED ON Signal
LEDON1 LED1 ON Signal
LEDON2 LED2 ON Signal
LEDON3 LED3 ON Signal
LEDON4 LED4 ON Signal
LEDON5 LED5 ON Signal
PAEND PAPER END DETECT Signal
PUNCH-
CLK
PUNCH MOTOR CLOCK DETECT Signal
PUNCHHP PUNCH HOME POSITION DETECT Signal
SREGHP SIDE REGISTRATION HOME POSITION DETECT Signal
SRGE1 SIDE REGISTRATION DETECT Signal 1
SRGE2 SIDE REGISTRATION DETECT Signal 2
SRGE3 SIDE REGISTRATION DETECT Signal 3
SRGE4 SIDE REGISTRATION DETECT Signal 4
UDROPN UPPER DOOR OPEN DETECT SWICH Signal