Canon EOS Rebel T6 W, Инструкция по эксплуатации

Страница: 98 / 114

Responding to Error Messages
98

Did you hold down the access point’s WPS (Wi-Fi Protected
Setup) button for the specified period of time?
 Hold down the WPS button for the period of time instructed by the
access point’s instruction manual.

Are you trying to establish a connection near the access point?
 Try establishing the connection when both devices are within reach
of each other.

Connection is in progress by other access points in
Pushbutton Connection mode (PBC mode) of Wi-Fi Protected
Setup (WPS).
 Wait a while before trying to establish the connection, or try to
establish a connection in PIN code connection mode (PIN mode)
(p.45, 68).

A problem other than error number 11 to 69 occurred.
 Turn off and on the camera’s power.

The target Web server does not have enough free space.

Delete unnecessary images on the Web service, check the free
space on the Web server, then try sending the data again.

Web service setting operation may have failed.
 Connect the camera and computer using an interface cable and
reconfigure Web service settings using EOS Utility (p.63).
68: Cannot connect to wireless LAN terminal. Retry from
the beginning.
69: Multiple wireless LAN terminals have been found.
Cannot connect. Retry from the beginning.
91: Other error
121: Not enough free space on server
122: Connect to a computer, and correct the settings for
the Web service with EOS software.