Canon EOS Rebel T6 W, Инструкция по эксплуатации

Страница: 50 / 114

50
Connecting to a Detected Network Manually

Enter the encryption key (password) specified for the access point.
For details on the specified encryption key, refer to the access
point’s instruction manual.

The screens displayed in steps 5 to 7 below vary depending on the
authentication and encryption specified for the access point.

Go to page 51 when the [ IP address set. ] screen is displayed
instead of the screens for steps 5 to 7.
5
Select a key index.

The [ Key index ] screen is displayed
only if WEP encryption is used by the
access point.

Select the key index number
specified for the access point, then
press <
0
>.

Select [ OK ] and press <
0
> to go to
the next screen.
6
Select the format and the number
of characters used for the key.

Select the format and the number of
characters used for the key, then
press <
0
>.

Select [ OK ] and press <
0
> to go to
the next screen.
7
Enter the encryption key.

Enter the encryption key using the
virtual keyboard (p.12), then press
the <
M
> button.
 The IP address setting screen is
displayed.

For subsequent operations, see page
51.
Entering the Access Point Encryption Key