Canon EOS DIGITAL REBEL XTi, Руководство по обслуживанию

Страница: 35 / 212

General Information
30
9-5 Noise reduction: Enabled with C.Fn-02 [Noise reduction] set to [Auto] or [On].
⑴ [Auto]: The noise level is detected automatically and noise
reduction is performed.
⑵ [On]: Noise reduction is performed on exposures 1 sec. or
longer.
⑶ The noise reduction process will take the same amount of
time as the exposure time.
9-6 Self-timer: 10-sec. delay
⑴ After starting, the self-timer can be canceled by pressing the
Drive button.
⑵ With C.Fn-7-1 [Mirror lockup], the self-timer delay is 2-sec.
9-7 Self-timer operation
1)Red-eye reduction lamp (blinks for the first 8 sec., then lights
indicator: for the remaining 2 sec.)
2) LCD monitor (Shot counter counts down from 10 to 1 in
1-sec. increments.)
3) Electronic beeper (Beeps at 2 Hz for the first 8 sec., then at 8
Hz for last 2 sec.)
9-8 Camera shake
Warning provided in Full Auto and Basic Zone modes.
warning: ・ If the shutter speed (Tv-auto) is 0 to 0.5 stops slower than
the reciprocal of the lens focal length × 1.25, the shutter
speed display blinks.
10． Drive
10-1 Drive modes:
① Single ② Continuous shooting ③ Self-timer/Remote control
⑴Creative Zone modes: ① - ③ are settable.
⑵ Basic Zone modes: ① or ② set automatically depending on
the shooting mode and ③ is settable.
10-2 Continuous shooting:
Depending on the shooting conditions, the image-processing
method switches automatically.
⑴ When the recording quality is JPEG, image processing is
executed even during continuous shooting.
⑵ With RAW, RAW+JPEG, and WB-BKT, image processing is not
executed during continuous shooting.
10-3 Continuous shooting With Battery Pack NB-2LH
speed:
(Approx. max. shots/sec.)
One-shot AF / MF
3.0
AI SERVO AF
USM lens
Non-USM lens
＊With 1/250 sec. or faster shutter speed at all recording quality modes.