Canon EOS 80D (W), Инструкция по эксплуатации

Страница: 475 / 526

475
3
Menu Settings
5
: Set-up 3 (Yellow)
Page
Video system NTSC / PAL
307
373
Feature guide Enable / Disable 75
Touch control Standard / Sensitive / Disable 63
Battery information
Power / Remaining capacity / Shutter count /
Recharge performance / Battery registration /
Serial number / Battery history
452
Sensor cleaning
Auto cleaning
f
: Enable / Disable
404
Clean now
f
Clean manually 407
z
button display
options
Displays camera settings / Electronic level /
Displays shooting functions
450
z
button LV display
options
Live View info switch setting: 1 / 2 / 3 / 4 262
Histogram display: Brightness / RGB /
Display size
263
Reset

When using a wireless function or GPS device, be sure to check the
countries and areas of use, and observe the laws and regulations of the
country or region.

Note that when connecting GPS Receiver GP-E2 (sold separately) with a
cable, preparations as below are necessary.
- Update the GP-E2’s firmware to Version 2.0.0 or later. (Using the cable
for connection is not possible with the firmware version earlier than
Version 2.0.0.)
- An interface cable (sold separately, p.469) must be used.
When using the GP-E2 attached to the hot shoe, preparations as above
are not necessary. For how to update the GP-E2’s firmware, refer to the
Canon website.

Wireless functions cannot be set if the camera is connected to a
computer, GPS receiver, or another device with an interface cable.