background image

175

Shutter release:

Soft-touch electromagnetic release

Self-timer:

10-sec. or 2-sec. delay

Remote control:

Remote control with N3 type terminal

• Flash

EOS-dedicated Speedlite: E-TTL II autoflash with EX-series Speedlite
PC terminal:

Provided

• Drive System

Drive modes:

Single, Continuous

Continuous shooting speed: Approx. 4 shots/sec.
Max. burst:

JPEG: Approx. 32 shots (Large, JPEG 8) 
RAW: Approx. 11 shots

• LCD Monitor

Type:

TFT color liquid-crystal monitor

Monitor size:

2.0 in. 

Pixels:

Approx. 230,000

Coverage:

100% with respect to the effective pixels

Brightness adjustment: Five levels provided
Interface languages:

12

• Image Playback

Image display format:

Single image, single image (INFO.), 4-image index, 9-
image index, magnified zoom (approx. 1.5x - 10x), 
rotated image

Highlight alert:

In the single image and single image (INFO.) formats, 
any overexposed highlight areas will blink in the image 
display. 

• Image Protection and Erase

Protection:

Erase protection of one image, all images in a folder, or 
all images in the memory card can be applied or 
canceled at one time. 

Erase:

One image, all images in a folder, or all images in the 
memory card can be erased (except protected images) 
at one time. 

Содержание Eos 1ds mark ii





















































































































































































Отзывы: