Canon EOS 1300D, Инструкция по эксплуатации

Страница: 99 / 326

99
In Basic Zone modes, the camera will normally focus on the closest
subject automatically. Therefore, it may not always focus on your target
subject.
In the <
d
>, <
s
>, <
f
>, and <
a
> modes, you can select one AF
point and focus only on the area covered by that AF point.
1
Press the <
S
> button
(
9
) .
 The selected AF point will be
displayed on the LCD monitor and in
the viewfinder.
2
Select the AF point.

Use the <
S
> cross keys to select
the AF point.

While looking through the viewfinder,
you can select the AF point by turning
the <
6
> dial until the desired AF
point lights up in red.

When all the AF points light up,
automatic AF point selection will be
set. The AF point will be selected
automatically to focus on the subject.

Pressing <
0
> toggles the AF point
selection between the center AF point
and automatic AF point selection.
3
Focus on the subject.

Aim the selected AF point over the
subject and press the shutter button
halfway to focus.
S
Selecting the AF Point
N