Editing
80
E
You can insert new scenes from your VCR or other camcorder onto your pre-
recorded tape using the ELURA’s analog line-in or DV in terminals. Original
video and audio will be replaced with the new video and audio.
Recording Over Existing Scenes (A/V Insert Editing)
VIDEO
S-VIDEO
OUTPUT
AUDIO
L
R
S-150 S-video Cable
STV-250 Stereo Video Cable
DV
A/V
S
IN/OUT
IN/OUT
IN/OUT
The tape in the camera:
When using the ELURA’s A/V insert function, only record to tapes recorded in SP
mode with continuously recorded time codes.
If there are non-recorded portions or portions recorded in LP mode on the tape,
recording may be interrupted or you may not be able to insert A/V correctly.
The playback tape:
Use only tapes without non-recorded portions.
If there are non-recorded portions or changes in the recording mode, you may not
be able to insert A/V correctly.
You cannot insert A/V in the following cases:
• The playback tape has been poorly recorded.
• During special playback: fast forward playback, rewind playback or slow
playback etc.
TV:
You cannot insert A/V from a TV program with anomalous synchronized signals,
such as when the program itself received poor signals.
